Where Can a Vehicle-mounted Aerial Work Platform Serve Roof Work?

The Vehicle-mounted Aerial Work Platform is a detachable roofing machine lifter that works in two ways. Mounted on the carrier, it deploys its outriggers, levels the chassis, and operates at the full vehicle height — a working height of about 53 m with a maximum lifting height of 50 m. When a site cannot take the whole rig, a crane lifts the module off the truck and sets it on the ground, where it runs from a local control panel at a working height of around 52 m, while the rated platform load of 10 to 25 tons stays unchanged. Either way it delivers on-site roll forming of steel roofing at height, giving contractors a mobile roof panel forming unit that reaches tight yards, rooftops, or ground stations a fixed truck cannot.

What are the technical parameters of Vehicle-mounted Aerial Work Platform?

Vehicle-mounted Aerial Work Platform Structure Diagram

What are the advantages of Vehicle-mounted Aerial Work Platform?

1. The company develops two main types: crawler type and vehicle-mounted type.

2. Lifting heights include: 15m, 16m, 17m, 18.5m, 20m, 21m, 23m, 24m, 25m, 26m, 27m, 28m, 30m, 32m, totaling 14 height options.

3. Lifting weight ranges include: 8 tons, 11 tons, 15 tons, 20 tons.

4. Suitable for models of color steel plate roll forming machines: Jiao Chi, roofing panels, steel profile equipment series (no model restrictions).

5. Vehicle-mounted vehicle types:

a. Types with 15m and 16m (standard) heights use trucks longer than 9.6m, suitable for both high and low side panels (recommended: 4 front and 4 rear wheels).

b. Types with heights below 17m, 18.5m, and 21m use 9.6m long trucks with 4 front and 8 rear wheels, suitable for both high and low side panels (recommended: 4 front and 8 rear wheels).

c. Types with heights from 21m to 32m use trucks longer than 13-17m, suitable for both high and low side panels (recommended: semi-trailer).

6. Color steel coil lifting device: replaces cranes to achieve remote-controlled hydraulic lifting and unloading functions (maximum lifting capacity 8 tons).

7. The platform features hydraulic extension, providing conditions for high-altitude installation, showcasing a fully hydraulic, fully remote-controlled multifunctional lifting device.

8. Can be used for interior decoration panels (suspended ceilings) with 360° universal installation.

9. The slewing bearing (large turntable) has a large diameter; double-row ball bearings are more precise and have less clearance than single-row ball bearings, making the rotation of heavy and high-torque equipment more stable and safe, effectively enhancing the lever support strength of the waist section.

10. The steel profile uses Q355B manganese steel; the main arm and outriggers use 700BL high-strength steel materials from cranes and vehicle beams. The hydraulic cylinders of the main arm and telescopic arm are thickened; the outrigger hydraulic cylinders are lengthened, making the equipment stable and non-swaying under heavy lifting weight and high lifting height, increasing the equipment's lifespan and safety reliability.

11. The crawler-type equipment can be remotely controlled for walking and turning, eliminating blind spots and the need for multiple operators. When transferring to other sites, it can be remotely driven onto trailers or supported by four legs to allow the trailer to reverse in, ensuring absolute safety.

12. The equipment uses a stainless steel control box, Mitsubishi PLC programming control, and a touch screen panel for monitoring (with manual and automatic operation functions). Both vehicle-mounted and crawler types can be operated by a single person, saving labor. Additionally, based on customer selection, cloud data transmission can be realized, allowing customers to view daily output, total output, equipment operating speed, main arm lifting angle, and video monitoring of equipment operation via mobile phone.

13. The company designs and produces equipment with heights from 18.5m to 24m that can lift 20-ton color steel plate roll forming machines (container + glue applicator), operating well; customer ideas and concepts are realized by us, and non-standard equipment can be customized.

14. Hydraulic valves use well-known domestic brands such as Beijing Huade and Yuci Yoyan; hydraulic piston pumps use products from Lolex and Jiangsu Qidong.